标识热缩套管美国测试与材料协会（ASTM）D2671用于电气的热缩管材测试D412橡胶张力性能及标准的测试方法G21测定合成聚合材料耐菌的推荐试验3、标识热缩套管要求3.1标识热缩套管材料此类套管由辐照交联、热稳定性好的改性聚烯烃化合物制作而成，并且要符合AMS-DTL-23053/51类性能要求。产品经平整设备处理后扁平笔直，具备的打印性能。材质应均匀，RNF-100-3/64-2-SP，点、裂纹、、气泡、、杂质、龟裂等。TTMS-12.7-0TTMS-25.4-4TTMS-25.4-0TN-381127-5-9TN-508095-5-9TMS-SCE-3/4-2.0-9TMS-SCE-3/4-2.0-4TMS-SCE-3/32-2.0-S1-9TMS-SCE-3/4-2.0-0TMS-SCE-3/8-2.0-9TMS-SCE-3/8-2.0-8TMS-SCE-3/8-2.0-0TMS-SCE-3/8-2.0-4TTMS-2.4-4TTMS-9.5-9TTMS-MP-4.8-4TTMS-MP-3.2-9TTMS-MP-9.5-9TTMS-MP-9.5-4TN-203127-10-9TN-191064-10-9TN-127111-10-9TPR7520-08-NTPR7520-07-NTTMS-50.8-0TTMS-9.5-4TTMS-6.4-0TTMS-50.8-9TTMS-50.8-4TTMS-MP-9.5-0TTMS-MP-4.8-9TTMS-MP-6.4-4TTMS-MP-12.7-9TTMS-MP-6.4-9TTMS-4.8-0TTMS-4.8-4TTMS-38.1-9TTMS-3.2-9TTMS-4.8-9TTMS-3.2-4TTMS-38.1-4TTMS-38.1-0TTMS-6.4-9TTMS-9.5-0TTMS-6.4-4交联聚烯烃_现货CB5149-000HRSR-175FR-8/NM-现货CB5149-000HRSR-175FR-8/NM，绝缘套管，这里云集了众多的供应商，采购商，制造商。这是现货CB5149-000HRCB5133-000HRHF-300FR-10-NMCB5134-000HRHF-400FR-10CB5135-000HRHF-400FR-10/97CF2745-000HRHF-200FR-6/97CF3108-000HRHF-125FR-2/97CF4649-000HRHF-300FR-10CF6155-000HRHF-060FR-10/226CF6166-000HRHF-200FR-10CJ6259-000HRHF-125FR-2CN1641-000HRHF-250FR-10/226CU2722-000HRHF-175FR-2/97CW8754-000HRHF-200FR-10/226-NMCW8755-000HRHF-250FR-10/226-NMCW8756-000HRHF-300FR-10/226-NMCY2100-000HRHF-060FR-18/97CY2809-000HRHF-250FR-6/97CY3047-000HRHF-060FR-2/97CY8602-000HRHF-060FR-10/97-NMHRHF-060CL-12HRHF-060FR-10HRHF-125FR-10/226-NMHRHF-175FR-10/226HRHF-175FR-10/97/NM标识热缩套管热老化按性能参数表及4.3节所规定的条件设定好烘箱并放入试样。温度为175±2℃168小时之后取出并按规定冷却至室温。当试样满足条件后按表3规定的相关项目进行测试。4.3.6标识热缩套管低温柔软性取三条试样按4.3节要求完全收缩。如果试样收缩后内径3/4″大于，即从纵向方向切成长度为6″，宽为1/4″的长条。将试样置于-55±1℃的冷柜内放置4小时，从表2中选择相应的芯棒并TMS-SCE-3/32-9TMS-SCE-3/32-4TMS-SCE-1/8-9TMS-SCE-1/8-4TMS-SCE-1/4-4TMS-SCE-3/8-4TMS-SCE-3/4-4TMS-SCE-1/2-4TMS-SCE-1-4TMS-SCE-11/2-4HT-SCE-3/32-9HT-SCE-1/8-9HT-SCE-1/4-4HT-SCE-3/4-4HT-SCE-11/2-4广州容信-肇庆RNF-100-3/64-WH-SP由广州容信塑胶制品有限公司提供。广州容信塑胶制品有限公司实力不俗，信誉可靠，在广东广州的绝缘材料等行业积累了大批忠诚的客户。广州容信带着精益求精的工作态度和不断的完善创新理念和您携手步入辉煌，共创美好未来！)